Description
xElac Miracord 50 Turntable
ELAC’s Miracord 50 Turntable is designed to deliver exceptional vinyl transcription, inspired by the iconic Miracord name from the Golden Age of Stereo, when turntables reigned supreme. The Miracord 50 is carefully engineered with a belt-drive motor and die-cast aluminum platter. A precision static balanced, straight-tube tonearm with removable headshell features a factory-mounted MM phono cartridge. Designed with convenience in mind, the Miracord 50 is equipped with a built-in defeatable phono preamplifier, allowing you to add this turntable to virtually any music system.
Anti-resonant chassis
Superior isolation is achieved with a chassis designed to minimize the sonic effects of vibration and feedback.
Built-in phono equalizer amplifier
Unlike most turntables, the Miracord 50 comes complete with a built-in phono preamp for correct RIAA equalization. Just plug it in and enjoy rich LP sound!
Precision tonearm and cartridge
The tonearm is a static-balance, straight- tube design with precision bearings, built-in anti-skate adjustment and removable bayonet-style headshell.
Specifications
|
Turntable Section |
|
|
Drive System |
Belt Drive |
|
Motor |
DC Motor |
|
Selectable Speeds |
33-1/3 and 45 RPM |
|
Motor Servo |
Speed Rotation and Servo System |
|
Rotation Speed Variation |
+/- 1% |
|
Wow and Flutter |
0.1% |
|
Signal-To-Noise Ratio |
-67 dB or higher (A-weighted) -60dB or higher (unweighted) |
|
Platter |
Aluminum die-cast |
|
Platter Diameter |
0 in / 300 mm |
|
Tonearm Section |
|
|
Type |
Aluminum tube, static-balanced |
|
Effective Arm Length |
8in / 223.6 mm |
|
Stylus Pressure Range |
0 to 4 g |
|
Cartridge Weight Range |
3.5 to 6g |
|
Effective Arm Mass |
27.4 g |
|
Overhang |
18.6 mm |
|
Offset Angle |
25 degrees |
|
Anti-Skating |
Adjustment Supported |
|
Main Bearing |
Stainless steel |
|
Cartridge Section |
|
|
Type |
Audio-Technica AT91 moving magnet |
|
Stylus Construction |
Bonded diamond |
|
Mount |
Half-inch |
|
Frequency Response |
20 Hz to 20 kHz |
|
Channel Separation |
>18 dB |
|
Channel Balance |
2.5 dB |
|
Vertical Tracking |
Angle 20 degrees |
|
Stylus Pressure |
2.0 g +/-0.5 g |
|
Cartridge Weight |
5.0 g +/-0.5 g |
|
Stylus Pressure |
2.0 g +/-0.5 g |
|
Headshell Weight |
0 g (including screws, nuts and wires) |
|
Phono Equalizer Amplifier |
|
|
Type |
Moving magnet (MM) |
|
Phono Output |
2.5 mV (1 kHz, 3.54 cm/sec) |
|
Line Output |
140 mV (-17 dBV) |
|
Phono/Line |
Switchable |
|
Supported Load Impedance |
47 kΩ |
|
General |
|
|
Connector |
RCA pin jack including RCA cable accessories |
|
Voltage |
100 to 240 V AC / 50 to 60 Hz |
|
Power Consumption |
1.5 W (less than 0.5 W at standby) |
|
Dimensions |
(WXHXD) 5.5 x 16.05 x 14.20 |
|
Weight |
12.10 lb |
For more information, please visit the manufacturer's website.
Shipping & Returns
xStandard Shipping
We offer a $15 flat rate Australia-wide shipping service, no matter how many items, however large or heavy items may incur a higher freight charge. If your item is subject to additional freight charges, this will be communicated to you when your order is processed. You are able to cancel your order and receive a full refund if you do not accept the additional freight charges. If any damage occurs during shipping, it is the responsibility of the customer to notify us within 24 hours of the order arriving. This is a requirement of our freight insurance and we are unable to lodge any claims after 24 hours from delivery.
Express Shipping
For express shipping, we offer a $30 flat rate Australia-wide shipping, however, larger/heavier items and remote areas may incur additional/higher fee which will be communicated with you at the time of processing your order.
In-store pickup
Any order can be picked up in-store, located at 9 Strathaird road Bundall 4217, during our regular business hours for no freight or handling fees. We request 2-4 business to process the order but often will have it ready in less time. For security reasons, when picking up in-store you must present photo ID if you have paid online via credit card. The card holder must be the person picking up the order.
P.O. Boxes and Parcel Lockers
Unfortunately, GCCS are unable to ship to PO Boxes or Parcel Lockers for insurance reasons at this time, an alternate shipping option may be offered. Additional fees may be applicable.
International Addresses
GCCS do not ship internationally at this time.
Warranties, Returns and Refunds
All products sold by GCCS come with a minimum 12 month warranty as stipulated by Australian consumer law. If your product is defective please contact us to organise the return of the item. All products are sent back to the manufacturer for assessment and either repair or replacement. Manufacturers can take up to four weeks for goods to be repaired. All goods are subject to the manufacturers terms and conditions for repair or replacement. Please contact us for further information. Any unopened item can be returned within 30 days of delivery for a refund less 20% re-stocking fee and freight costs. If the item has been opened, unpacked or used please advise us to discuss options. GCCS will pay freight charges on any orders returned if the order is the result of our error. Refunds are paid back to you by the same method of payment for that order. Refunds can take 48-72 hours after the item has been received by our store. To organise the return of an item, please contact us before sending the item to ensure prompt service.
- Choosing a selection results in a full page refresh.